SSI 403 Graphite Gasket

SSI 403 : Graphite Gasket, 그라파이트 가스켓

Characteristic

This product is made by stamping graphite sheet with a certain dimension. Since there is little reaction to temperature change, wide use is possible. Because SUS 316L and special metal sheet are used as reinforcing material according to the use conditions, sufficient sealing effect can be obtained even in high pressure and high temperature. It is made according to the customer's request.

이 제품은 그라파이트 시트를 일정한 치수로 타발 가공한 것이다. 온도변화에 대한 반응이 거의 없으므로 폭 넓은 사용이 가능하다. 사용조건에 따라 SUS 316L 및 특수한 금속 시트를 보강재로 넣기 때문에 고압, 고열에서도 충분한 밀봉효과를 나타낼 수 있다. 주문자 요구에 따라 제작된다.

Application

Hydrocarbon, organic solvent, LNG, hot water, high temperature and pressure steam, valve bonnet, gaskets for heat exchanger, general piping flange and engine gasket.

이 블로그의 인기 게시물

Certification of Spiral Wound Gasket - SAMSUNG INDUSTRY

On July 17, 2017, Samsung Industries completed the shell specification MESC SPE 85/300 product certification for our product spiral wound gasket. This test was conducted by amtec, an authorized testing institute in Germany, in accordance with the MESC SPE 85/300 test standard of Shell, USA. Spiral wound gasket TAT test certificate ( Total 40 pages) 1. Explanation of Test Specifications MESC SPSE 85/300 is a type approval test for gaskets( Type Acceptance Testing of Gasket (TAT) 2. Sample Specification Used for Testing The spiral wound gasket applied to this test certificate satisfies ASME B16.20 and MESC SPE 85/103 standards. 3. Test Conditions 4. Test Items 1) Visual Examination Purpose : To ensure that the gasket design is in accordance with the applicable design standard and MESC SPE as per Table 1(e.g. marking, condition of sealing surfaces or superficial damage.) Procedure : Execute prior and after each test as described...

자세한 내용 보기

SSI 817 Lens Ring Joint Gasket

SSI 817 Lens Ring Joint Gasket Lens Gaskets are reliable gaskets for high-pressure applications. They are re-usable as the sealing effect is throught about almost entirely by elastic deformation of the gasket surface. Dimension Tables for 2.3 Lens gaskets for flange connections PN 64 to PN 400 To DIN 2696 Example order for a lens gasket with d1=94mm (inner diameter)and d2=143mm (outer diameter, of…) Lens gasket 94×143 DIN 2696/1.7335 Lens Gasket은 고압 어플리케이션을 위한 신뢰할 수 있는 가스켓입니다. Sealing 효과는 가스켓 표면의 탄성변형에 의해 사라지므로 재사용이 가능합니다.

자세한 내용 보기

RING JOINT GASKET

Characteristic Ring joint gaskets are high temperature, high pressure gaskets largely used in offshore and onshore petrochemical applications. They are precision-engineered components designed to be used in conjunction with precision machined flanges. All our Ring joints are manufactured according to ASME B16.20 and API 6A. ▣ Maximum Hardness for Ring Gaskets NOTES : (1) May be low-carbon steel, not to exceed maximum hardness of 90 Brinell-56 Rockwell “B”. (2) Other CRAs (2-1) Ring gaskets material shall conform to the manufacturer’s written specification. (2-2) Hardness shall meet manufacturer’s written specification. ▣ Materials General. Ring-joint gasket materials, some of which are listed in Table 1, shall be selected by the user based on suitability for the service conditions. It is recommended that ring-joint gaskets be of a lesser hardness than that of the mating flanges. Hardness. Ring-joint gaskets of materials listed in Table 1 sh...

자세한 내용 보기

SAMSUNG INDUSTRY

이 블로그 검색