SSI 401 Graphite Tape

SSI 401 : Graphite Tape

Characteristic

Size-free packing made by cutting the graphite sheet to a certain width and wrinkling the surface. It can be simply molded and used.

Application

Heated gas, hot oil heat mediator, steam, hot water, high temperature, hydrocarbon organic solvent, various chemicals pump, valve and shaft.

이 블로그의 인기 게시물

METAL O - RING GASKET

METAL O - RING GASKET Metal O-ring is unique gasket made of meta tube which is formed and buttwelded into a round shape or other shapes. The gasket is equipped with various advantages and it can be formed into various shapes according to the shape of mating face and can be used for high temperature, high pressure and ultra-vacuum services. It is the most suitable gasket for sealing such machinery and equipments that space factor and compactness are accounted much of for their designs. Special surface coating is available according to necessity. Metal O-ring은 메타 튜브로 만든 독특한 가스켓으로 둥근모양 또는 다른모양으로 만들어지고 접합된다. 다양한 장점을 가지고 있으며, 낮은 체결력으로 밀봉될 수 있고, 결합면의 모양에 따라 다양한 형태로 형성될 수 있으며 고온, 고압 및 초 진공서비스에 사용될 수 있다. 이러한 기계 및 장비를 밀봉하기 위한 최적이 가스켓으로 공간계수 및 소형화가 설계에 많이 반영된다. 필요에 따라 특수 표면 코팅이 가능하다. NOTES 1. The temperature resistance of coated metal O-ring is govemed by either tube or coating material. 2. PTFE coating is black in color. ...

자세한 내용 보기

SSI 810 IX Seal Ring

SSI 810 IX Seal Ring IX seal ring Norsok Flange and IX seal ring How the NCF5 works The IX Seal-rings are designed and used where the NORSOK CFC (Compact Flange Connections) are in use. The rings come in fore different kinds of steel and are coated with PTFE in varying colors in order to distinguish between them. Standard identification NORSOK STANDARD L-005 (NCF5). IX Seal-ring은 NORSOK CFC (Compact Flange Connections)가 사용되는 곳에서 설계되고 사용됩니다. 링은 서로 4종의 스틸이 있으며 서로 구분하기 위해 다양한 색상의 PTFE로 코팅되어 있습니다. 표준 식별방법은 NORSOK 표준 L-005 (NCF5)을 따릅니다. Typical seal ring materials The NCF5 uses a steel seal ring (IX). Typical minimum yield stress and ultimate stress for the seal ring material is 300 MPa and 360 MPa, respectively, in order to allow for reasonably elastic springback. Lower strength may be used, but is not recommended. The user is responsible for selecting a seal ring material which is suitable for the service med...

자세한 내용 보기

SSI 850 Basic Type Metal O-ring

SSI 850 Basic Type Metal O-ring Basic type Metal O-Ring made of metal tube, which is formed and buttwelded into various shapes. It is suitable for medium pressure service ranging from 10^-12 torr vacuum to 70㎏/㎠ [6.8 Mpa]. It is necessary to use with a retainer ring when used on raised or flat face flange. Basic Type Metal O-Riing은 금속 튜브로 만들어지며 다양한 형태로 형성됩니다. 10^-12torr 진공에서 70kg/cm2 [6.8MPa]까지의 중압 서비스에 적합합니다. Raised 또는 Flat Face 플랜지에 사용되는 경우 리테이너 링과 함께 사용해야합니다. Applications Vacuum equipments, combustion engines, electronic apparatus, heavy electric machinery and apparatus. Hydraulic machinery and equipments, plastic forming machines, on joints in aircrafts, pile. etc. NOTES Use plated or PTFE coated metal O-ring in vacuum and general gases. http://www.ssigp.com/eng/

자세한 내용 보기

SAMSUNG INDUSTRY

이 블로그 검색