기본 콘텐츠로 건너뛰기

INSULATION GASKET KIT

Samsung industry's Insulation Gasket kits have been providing in the petrochemical industry and refinery facilities where safety, pipeline integrity and reliability are strongly demanded. Our insulation gasket kits have been widely using by experienced engineers and technicians in their continued efforts to control corrosion, one of natural destructive elements Samsung Industries Flange insulation products are manufactured with advanced engineering materials. Isolation products include various options for isolating / sealing gaskets with various sleeves and washers. You can order parts separately or you can order the entire flange insulation kit.􀀀 Flange insulation kits are designed to work with insulating gaskets to provide complete electrical insulation of flange assemblies. The insulation kit consists of one insulation sleeve, two insulation washers and two steel washers for each bolt of the flange assembly. The purpose of the insulation sleeve is to electrically isolate the bolts from each side of the flange, and the insulation washer provides electrical insulation for each nut attached to the bolt. This isolation method provides the user with a highly reliable solution that completes the electrical insulation of the flanged joint.

삼성인더스트리 절연가스켓 KIT는 안전과 파이프라인의 완전무결과 신뢰성이 강하게 요구되어지는 석유화학공업과 정유시설에 공급되고 있습니다. 삼성인더스트리에서 만든 플랜지 절연 가스켓은 경험 많은 엔지니어와 기술자에 의해서 자연 파괴 요소 중 하나 인 부식 방지의 지속적인 노력에 널리 사용되고 있습니다.
삼성인더스트리 플랜지 절연 제품은 고급 엔지니어링 자재로 제작됩니다. 절연 제품에는 다양한 슬리브 및 와셔와 함께 가스켓을 격리 / 밀봉하는 다양한 선택 사양이 포함됩니다. 부품을 별도로 주문하거나 플랜지 절연 키트 전체를 주문할 수 있습니다.
플랜지 절연 키트는 절연 가스켓과 함께 작동하여 플랜지 어셈블리의 완벽한 전기 절연을 수행하도록 설계되었습니다. 절연 키트는 플랜지 어셈블리의 각 볼트에 대해 하나의 절연 슬리브, 2 개의 절연 와셔 및 2 개의 스틸 와셔로 구성됩니다. 절연 슬리브의 목적은 플랜지의 각 측면에서 볼트를 전기적으로 분리하는 것이고, 절연 와셔는 볼트에 부착 된 각각의 너트에 대해 전기 절연을 제공합니다. 이 분리 방법은 플랜지 조인트의 전기적 절연을 완성하는 고 신뢰성 솔루션을 사용자에게 제공합니다.


▣Sealing Gasket Physical Properties

▣Seal Element Temperature Limits
 
 
▣Sleeve Material Physical Properties
 
 
▣Special Sleeve Material Physical Properties
 
HM-HS2625 TUBE(Heat Shrinkable Tube)
 

1. Characteristics    
     - Excellent Insulation
      - Excellent Flexibility
      - Excellent Incombustibility
        UL VW-1［except clear］
        UL 224 ［File No : E233220］
     - Easy to be Applied
      - Light Weight / Thin Thickness
     - Min. Temp. for Shrinkage : 90℃
     - Working Temp. : - 55℃ ∼ 125℃
      - Ratio of Shrinkage 1:2

2. Application     Insulation and Protection

3. Product Information
     3.1 Product Dimensions

 

 ▣Special Sleeve Material Physical Properties

 
▣Material Physical Properties
Retainer Material Physical Properties (Typical Values)
 
Seal Element Temperature Limit (Typical Values)
 
Sleeve Material Physical Properties (Typical Values)
 
Metal Core


Metal core material is normally high Integrity 316 stainless steel. It is possible to use high-grade material according to customer's request.

Insulation Washer

Material is G-10 GRE (glass reinforced Epoxy) and G-11 GRE.
Washer thickness : 1) SAMSUNG INDUSTRY 3.0mm 2) GPT, APS 1/8"

Metallic Washer

Material : 1) Zinc Plated Carbon steel   
                2) Stainless Steel Washer
Washer Thickness : 1) SAMSUNG INDUSTRY 3.0mm
                                 2) GPT, APS 1/8"

Bolt / Nut

Standard is stud bolt of ASTM specification.Other Specification : KS, JIS, DIN, ASME(ANSI)
 
Standard Style
 
 
Sleeve / Washer Type
 
▣Dimension & How to order
 

Insulation Gasket SGE Dimension for ANSI B16.5


Bolt L Calculation = (Flange bottom height*2) + (Nut T*2)
                               + After tightening Gasket T + (Steel Washer T*2)
                               + (Insulation Washer T *2) + {(Bolt Pitch*3)*2}
 




 

Insulation Gasket SVCS Dimension for ANSI B16.5

 

NOTES
:Gasket I/D Dimensions can change depending on Schedule Pipe Flange, and the above table is along the STD Schedule Pipe.


For Flange Isolation kits over 24” in addition to the above please specify 
:24” 사이즈 보다 크거나 다른 Specification (API, MSS, JIS, DIN등등)의 Insulation Kit는 당사의 Gasket Technical Data Book을 참조하거나 영업기술부에 문의하여 주시기 바랍니다.

Other Technical Data 
: Installation and Torque Table. Seating Sterss etc.당사는 당사제품뿐만 아니라 세계적으로 품질이 검증된 다양한 인슐레이션 Kit 제품을 단독으로 공급하고 있습니다. 제품별 상세한 자료는 제품 브로셔 또는 당사 홈페이지를 참고하시기 바랍니다.
 
How to order insualtion gasket kit

라벨:

댓글

댓글 쓰기

이 블로그의 인기 게시물

Certification of Spiral Wound Gasket - SAMSUNG INDUSTRY

On July 17, 2017, Samsung Industries completed the shell specification MESC SPE 85/300 product certification for our product spiral wound gasket. This test was conducted by amtec, an authorized testing institute in Germany, in accordance with the MESC SPE 85/300 test standard of Shell, USA. Spiral wound gasket TAT test certificate ( Total 40 pages) 1. Explanation of Test Specifications MESC SPSE 85/300 is a type approval test for gaskets( Type Acceptance Testing of Gasket (TAT) 2. Sample Specification Used for Testing The spiral wound gasket applied to this test certificate satisfies ASME B16.20 and MESC SPE 85/103 standards.   3. Test Conditions   4. Test Items 1) Visual Examination Purpose : To ensure that the gasket design is in accordance with the applicable design standard and MESC SPE as per Table 1(e.g. marking, condition of sealing surfaces or superficial damage.) Procedure : Execute prior and after each test as described...
댓글 쓰기
자세한 내용 보기

SSI 817 Lens Ring Joint Gasket

SSI 817 Lens Ring Joint Gasket   Lens Gaskets are reliable gaskets for high-pressure applications. They are re-usable as the sealing effect is throught about almost entirely by elastic deformation of the gasket surface. Dimension Tables for 2.3 Lens gaskets for flange connections PN 64 to PN 400 To DIN 2696 Example order for a lens gasket with d1=94mm (inner diameter)and d2=143mm (outer diameter, of…) Lens gasket 94×143 DIN 2696/1.7335 Lens Gasket은 고압 어플리케이션을 위한 신뢰할 수 있는 가스켓입니다. Sealing 효과는 가스켓 표면의 탄성변형에 의해 사라지므로 재사용이 가능합니다.
댓글 쓰기
자세한 내용 보기

RING JOINT GASKET

Characteristic Ring joint gaskets are high temperature, high pressure gaskets largely used in offshore and onshore petrochemical applications. They are precision-engineered components designed to be used in conjunction with precision machined flanges. All our Ring joints are manufactured according to ASME B16.20 and API 6A. ▣ Maximum Hardness for Ring Gaskets NOTES : (1) May be low-carbon steel, not to exceed maximum hardness of 90 Brinell-56 Rockwell “B”. (2) Other CRAs (2-1) Ring gaskets material shall conform to the manufacturer’s written specification. (2-2) Hardness shall meet manufacturer’s written specification.   ▣ Materials   General. Ring-joint gasket materials, some of which are listed in Table 1, shall be selected by the user based on suitability for the service conditions. It is recommended that ring-joint gaskets be of a lesser hardness than that of the mating flanges. Hardness. Ring-joint gaskets of materials listed in Table 1 sh...
댓글 쓰기
자세한 내용 보기