SSI 402 Anti-VOC Packing

SSI 402 Anti-VOC (Volatile Organic Compound) Packing, 휘발성 유기화합물 억제 패킹

Characteristic

Packing of graphite sheet with compression molding. It can be used from low temperature to high temperature without damaging the reciprocating and rotating shafts due to the self-lubricating of graphite itself, and it is easy to seal and maintain.

그라파이트 시트를 일정한 치수로 압축성형 가공한 패킹. 흑연 자체의 자기윤활성으로 왕복 및 회전축에 손상을 주지 않고 저온에서 고온까지 사용가능하며 밀봉작용과 보수유지가 간단하다.

Application

Steam, water, gases, heat medium, oil, hydrocarbon, organic solvents, volatile organic compounds, LNG, extremely low temperature fluids.

Composition

Anti0VOC Packing is composed as shown in the figure. The intermediate stage composed of several low density graphite is a stress relieving property and it is economical because it can be used semi-permanently due to various changes and thermal hardening phenomenon. By using Graphite & Inconel wire at TOP & BOTTOM, it guarantees excellent sealing at high temperature and high pressure. Packing ring plays a role to ensure compression by uniformly distributing compression force applied to Anti-VOC Packing.

API 622

This API Standard specifies the requirements for comparative testing of valve stem packing for process applications where fugitive emissions are a consideration. High temperature packing(s) shall be suitable for use at service temperatures –29°C to 538°C (–20 °F to 1000 °F) and temperature limited packing(s), suitable for manufacturer specified temperature range. Factors affecting fugitive emissions performance that are considered by this Standard include temperature, pressure, thermal cycling, mechanical cycling and corrosion.

이 블로그의 인기 게시물

Certification of Spiral Wound Gasket - SAMSUNG INDUSTRY

On July 17, 2017, Samsung Industries completed the shell specification MESC SPE 85/300 product certification for our product spiral wound gasket. This test was conducted by amtec, an authorized testing institute in Germany, in accordance with the MESC SPE 85/300 test standard of Shell, USA. Spiral wound gasket TAT test certificate ( Total 40 pages) 1. Explanation of Test Specifications MESC SPSE 85/300 is a type approval test for gaskets( Type Acceptance Testing of Gasket (TAT) 2. Sample Specification Used for Testing The spiral wound gasket applied to this test certificate satisfies ASME B16.20 and MESC SPE 85/103 standards. 3. Test Conditions 4. Test Items 1) Visual Examination Purpose : To ensure that the gasket design is in accordance with the applicable design standard and MESC SPE as per Table 1(e.g. marking, condition of sealing surfaces or superficial damage.) Procedure : Execute prior and after each test as described...

자세한 내용 보기

RING JOINT GASKET

Characteristic Ring joint gaskets are high temperature, high pressure gaskets largely used in offshore and onshore petrochemical applications. They are precision-engineered components designed to be used in conjunction with precision machined flanges. All our Ring joints are manufactured according to ASME B16.20 and API 6A. ▣ Maximum Hardness for Ring Gaskets NOTES : (1) May be low-carbon steel, not to exceed maximum hardness of 90 Brinell-56 Rockwell “B”. (2) Other CRAs (2-1) Ring gaskets material shall conform to the manufacturer’s written specification. (2-2) Hardness shall meet manufacturer’s written specification. ▣ Materials General. Ring-joint gasket materials, some of which are listed in Table 1, shall be selected by the user based on suitability for the service conditions. It is recommended that ring-joint gaskets be of a lesser hardness than that of the mating flanges. Hardness. Ring-joint gaskets of materials listed in Table 1 sh...

자세한 내용 보기

SSI 817 Lens Ring Joint Gasket

SSI 817 Lens Ring Joint Gasket Lens Gaskets are reliable gaskets for high-pressure applications. They are re-usable as the sealing effect is throught about almost entirely by elastic deformation of the gasket surface. Dimension Tables for 2.3 Lens gaskets for flange connections PN 64 to PN 400 To DIN 2696 Example order for a lens gasket with d1=94mm (inner diameter)and d2=143mm (outer diameter, of…) Lens gasket 94×143 DIN 2696/1.7335 Lens Gasket은 고압 어플리케이션을 위한 신뢰할 수 있는 가스켓입니다. Sealing 효과는 가스켓 표면의 탄성변형에 의해 사라지므로 재사용이 가능합니다.

자세한 내용 보기

SAMSUNG INDUSTRY

이 블로그 검색