SSI 4003 Expanded Graphite Braided Packing wrapped with Teflon

SSI 4003 : Expanded Graphite Braided Packing wrapped with Teflon, 밸브 스템 패킹

Characteristic

This product uses threads wrapped with Teflon on Expanded Graphite Yarn. It is a lattice braided product that prevents the graphite from escaping under high temperature and high pressure. It has excellent heat resistance and chemical resistance. Especially, it is suitable for valve stem packing because it has excellent lubricity. Because there is no joint in the middle of the mold packing, it has low mounting stess and it has excellent sealing ability and minimizes the friction with the stem.

Expanded Graphite yarn에 테프론을 Wrapping한 실을 사용한다. 격자 편조한 제품으로 고온 고압에서 Graphite가 빠져나가는 것을 방지한다. 내열성, 내화학성이 우수하며 특히 윤활성이 우수하므로 밸브의 Stem 패킹용으로 적합한 제품이다. Mold Packing 중간에는 이음매가 없으므로 낮은 마운팅 Stress로 씰링성이 우수하며 Stem과의 마찰을 최소화 할 수 있다.

•Avoids "slip-stick" effect•Excellent in control valves•Easy to cut, asemble and disassemble•Non-hardening, good reset capability, coefficient of thermal expansion similar to steel•High cross section density and sealability to minimize emissions•Wear and extrusion stability through structure reinforcement•Low coefficient of friction minimises adjustment force on valve

•"slip-stick" 효과 방지•우수한 밸브 제어 •절단, 재조립 및 분해가 용이함•비경화, 우수한 리셋 기능, steel과 유사한 열팽창 계수•배출 가스 최소화를 위한 높은 단면 밀도 및 실링성•구조 보강을 통한 마모 및 압출 안정성•마찰 계수가 낮아 밸브의 조정력 최소화

Application

High pressure valve and slow rotating, pumps vessels.

이 블로그의 인기 게시물

SSI 810 IX Seal Ring

SSI 810 IX Seal Ring IX seal ring Norsok Flange and IX seal ring How the NCF5 works The IX Seal-rings are designed and used where the NORSOK CFC (Compact Flange Connections) are in use. The rings come in fore different kinds of steel and are coated with PTFE in varying colors in order to distinguish between them. Standard identification NORSOK STANDARD L-005 (NCF5). IX Seal-ring은 NORSOK CFC (Compact Flange Connections)가 사용되는 곳에서 설계되고 사용됩니다. 링은 서로 4종의 스틸이 있으며 서로 구분하기 위해 다양한 색상의 PTFE로 코팅되어 있습니다. 표준 식별방법은 NORSOK 표준 L-005 (NCF5)을 따릅니다. Typical seal ring materials The NCF5 uses a steel seal ring (IX). Typical minimum yield stress and ultimate stress for the seal ring material is 300 MPa and 360 MPa, respectively, in order to allow for reasonably elastic springback. Lower strength may be used, but is not recommended. The user is responsible for selecting a seal ring material which is suitable for the service med...

자세한 내용 보기

SSI 850 Basic Type Metal O-ring

SSI 850 Basic Type Metal O-ring Basic type Metal O-Ring made of metal tube, which is formed and buttwelded into various shapes. It is suitable for medium pressure service ranging from 10^-12 torr vacuum to 70㎏/㎠ [6.8 Mpa]. It is necessary to use with a retainer ring when used on raised or flat face flange. Basic Type Metal O-Riing은 금속 튜브로 만들어지며 다양한 형태로 형성됩니다. 10^-12torr 진공에서 70kg/cm2 [6.8MPa]까지의 중압 서비스에 적합합니다. Raised 또는 Flat Face 플랜지에 사용되는 경우 리테이너 링과 함께 사용해야합니다. Applications Vacuum equipments, combustion engines, electronic apparatus, heavy electric machinery and apparatus. Hydraulic machinery and equipments, plastic forming machines, on joints in aircrafts, pile. etc. NOTES Use plated or PTFE coated metal O-ring in vacuum and general gases. http://www.ssigp.com/eng/

자세한 내용 보기

Certification of Spiral Wound Gasket - SAMSUNG INDUSTRY

On July 17, 2017, Samsung Industries completed the shell specification MESC SPE 85/300 product certification for our product spiral wound gasket. This test was conducted by amtec, an authorized testing institute in Germany, in accordance with the MESC SPE 85/300 test standard of Shell, USA. Spiral wound gasket TAT test certificate ( Total 40 pages) 1. Explanation of Test Specifications MESC SPSE 85/300 is a type approval test for gaskets( Type Acceptance Testing of Gasket (TAT) 2. Sample Specification Used for Testing The spiral wound gasket applied to this test certificate satisfies ASME B16.20 and MESC SPE 85/103 standards. 3. Test Conditions 4. Test Items 1) Visual Examination Purpose : To ensure that the gasket design is in accordance with the applicable design standard and MESC SPE as per Table 1(e.g. marking, condition of sealing surfaces or superficial damage.) Procedure : Execute prior and after each test as described...

자세한 내용 보기

SAMSUNG INDUSTRY

이 블로그 검색