기본 콘텐츠로 건너뛰기

SSI 815 Bridgeman Ring Joint Gasket

SSI 815 Bridgeman Ring Joint Gasket
They are of unique pressure-energized type gaskets. Bridgeman’s “Principle of Unsupported Area” is made-used of for the design of these types. The gaskets are designed to seal by utilizing pressure loaded on flating head.
 
SSI 815 Bridgeman Ring Joint Gaskets’ Specific Designs
라벨:

댓글

댓글 쓰기

이 블로그의 인기 게시물

SSI 810 IX Seal Ring

SSI 810 IX Seal Ring  IX seal ring   Norsok Flange and IX seal ring    How the NCF5 works   The IX Seal-rings are designed and used where the NORSOK CFC (Compact Flange Connections) are in use. The rings come in fore different kinds of steel and are coated with PTFE in varying colors in order to distinguish between them. Standard identification NORSOK STANDARD L-005 (NCF5). IX Seal-ring은 NORSOK CFC (Compact Flange Connections)가 사용되는 곳에서 설계되고 사용됩니다. 링은 서로 4종의 스틸이 있으며 서로 구분하기 위해 다양한 색상의 PTFE로 코팅되어 있습니다. 표준 식별방법은 NORSOK 표준 L-005 (NCF5)을 따릅니다.     Typical seal ring materials The NCF5 uses a steel seal ring (IX). Typical minimum yield stress and ultimate stress for the seal ring material is 300 MPa and 360 MPa, respectively, in order to allow for reasonably elastic springback. Lower strength may be used, but is not recommended. The user is responsible for selecting a seal ring material which is suitable for the service med...
댓글 쓰기
자세한 내용 보기

SSI 850 Basic Type Metal O-ring

SSI 850 Basic Type Metal O-ring   Basic type Metal O-Ring made of metal tube, which is formed and buttwelded into various shapes. It is suitable for medium pressure service ranging from 10^-12 torr vacuum to 70㎏/㎠ [6.8 Mpa]. It is necessary to use with a retainer ring when used on raised or flat face flange. Basic Type Metal O-Riing은 금속 튜브로 만들어지며 다양한 형태로 형성됩니다. 10^-12torr 진공에서 70kg/cm2 [6.8MPa]까지의 중압 서비스에 적합합니다. Raised 또는 Flat Face 플랜지에 사용되는 경우 리테이너 링과 함께 사용해야합니다.     Applications Vacuum equipments, combustion engines, electronic apparatus, heavy electric machinery and apparatus. Hydraulic machinery and equipments, plastic forming machines, on joints in aircrafts, pile. etc.       NOTES Use plated or PTFE coated metal O-ring in vacuum and general gases.     http://www.ssigp.com/eng/    
댓글 쓰기
자세한 내용 보기

Certification of Spiral Wound Gasket - SAMSUNG INDUSTRY

On July 17, 2017, Samsung Industries completed the shell specification MESC SPE 85/300 product certification for our product spiral wound gasket. This test was conducted by amtec, an authorized testing institute in Germany, in accordance with the MESC SPE 85/300 test standard of Shell, USA. Spiral wound gasket TAT test certificate ( Total 40 pages) 1. Explanation of Test Specifications MESC SPSE 85/300 is a type approval test for gaskets( Type Acceptance Testing of Gasket (TAT) 2. Sample Specification Used for Testing The spiral wound gasket applied to this test certificate satisfies ASME B16.20 and MESC SPE 85/103 standards.   3. Test Conditions   4. Test Items 1) Visual Examination Purpose : To ensure that the gasket design is in accordance with the applicable design standard and MESC SPE as per Table 1(e.g. marking, condition of sealing surfaces or superficial damage.) Procedure : Execute prior and after each test as described...
댓글 쓰기
자세한 내용 보기