SAMSUNG INDUSTRY

METAL O - RING GASKET Metal O-ring is unique gasket made of meta tube which is formed and buttwelded into a round shape or other shapes. The gasket is equipped with various advantages and it can be formed into various shapes according to the shape of mating face and can be used for high temperature, high pressure and ultra-vacuum services. It is the most suitable gasket for sealing such machinery and equipments that space factor and compactness are accounted much of for their designs. Special surface coating is available according to necessity.   Metal O-ring은 메타 튜브로 만든 독특한 가스켓으로 둥근모양 또는 다른모양으로 만들어지고 접합된다. 다양한 장점을 가지고 있으며, 낮은 체결력으로 밀봉될 수 있고, 결합면의 모양에 따라 다양한 형태로 형성될 수 있으며 고온, 고압 및 초 진공서비스에 사용될 수 있다. 이러한 기계 및 장비를 밀봉하기 위한 최적이 가스켓으로 공간계수 및 소형화가 설계에 많이 반영된다. 필요에 따라 특수 표면 코팅이 가능하다.   NOTES 1. The temperature resistance of coated metal O-ring is govemed by either tube or coating material. 2. PTFE coating is black in color.           http://www.ssigp.com/eng/

SSI 810 IX Seal Ring  IX seal ring   Norsok Flange and IX seal ring    How the NCF5 works   The IX Seal-rings are designed and used where the NORSOK CFC (Compact Flange Connections) are in use. The rings come in fore different kinds of steel and are coated with PTFE in varying colors in order to distinguish between them. Standard identification NORSOK STANDARD L-005 (NCF5). IX Seal-ring은 NORSOK CFC (Compact Flange Connections)가 사용되는 곳에서 설계되고 사용됩니다. 링은 서로 4종의 스틸이 있으며 서로 구분하기 위해 다양한 색상의 PTFE로 코팅되어 있습니다. 표준 식별방법은 NORSOK 표준 L-005 (NCF5)을 따릅니다.     Typical seal ring materials The NCF5 uses a steel seal ring (IX). Typical minimum yield stress and ultimate stress for the seal ring material is 300 MPa and 360 MPa, respectively, in order to allow for reasonably elastic springback. Lower strength may be used, but is not recommended. The user is responsible for selecting a seal ring material which is suitable for the service medium and the design temperatur

SSI 817 Lens Ring Joint Gasket   Lens Gaskets are reliable gaskets for high-pressure applications. They are re-usable as the sealing effect is throught about almost entirely by elastic deformation of the gasket surface. Dimension Tables for 2.3 Lens gaskets for flange connections PN 64 to PN 400 To DIN 2696 Example order for a lens gasket with d1=94mm (inner diameter)and d2=143mm (outer diameter, of…) Lens gasket 94×143 DIN 2696/1.7335 Lens Gasket은 고압 어플리케이션을 위한 신뢰할 수 있는 가스켓입니다. Sealing 효과는 가스켓 표면의 탄성변형에 의해 사라지므로 재사용이 가능합니다.

SSI 816 Delta Ring Joint Gasket Delta Ring Joint Gasket proven is gasket for high pressure vessels. We can make this gasket for your specification from all suitable materials. 입증된 Delta Ring Joint Gasket은 고압용기용 가스켓입니다. 우리는 모든 적합한 재료로 귀하의 사양에 맞게 가스켓을 제조할 수 있습니다.

SSI 815 Bridgeman Ring Joint Gasket They are of unique pressure-energized type gaskets. Bridgeman’s “Principle of Unsupported Area” is made-used of for the design of these types. The gaskets are designed to seal by utilizing pressure loaded on flating head.   SSI 815 Bridgeman Ring Joint Gaskets’ Specific Designs

SSI 814 BX TYPE BX RING GASKET DIMENSIONS AND TOLERANCES GENERAL NOTES (a) All dimensions are in millimeters. (b) Radius, R, shall be 8% to 12% of the gasket height, H. (c) Tolerances :      * OD = outside diameter of ring, +0.00, -0.15      * H = height of ring, +0.20, -0.00               Variation in height throughout the entire circumference of any ring shall not               exceed 0.10 within these   tolerances.      * A = width of ring, +0.20, -0.00               Variation in width throughout the entire circumference of any ring shall not               exceed 0.10 within these  tolerances.      * ODT = outside diameter of flat, ±0.05      * C = width of flat, +0.15, -0.00      * D = hole size, ±0.5      * R = radius of ring [see General Note (b)]      * 23 deg = angle, ±0 deg 15 mi n NOTES (1) One pressure passage hole is required per gasket as illustrated. The centerline of the hole shall be located  at the midpoint of dimension C.